Digital Access Control
These
systems usually consist of a Power Supply, Digital Keypad and a Door
Release Mechanism. The Power Supply will be connected into a local
mains supply and will provide power to the Digital Keypad, which will
be located outside of the building adjacent to the entrance door being
secured. Also connected to the Digital Keypad will be the Door Release
Mechanism, which should be rated so as to compliment the security of
the system.
Access
is granted upon entry of a code.
This can either be a common code, issued to all users of the
system or individual codes (PIN – personnel identification numbers)
issued to each user of the system.
Common
codes can provide medium security for very small groups (perhaps 5 to
10) of users in a controlled environment.
The problem with this set up is that the code gets passed on to
or is seen by third parties very quickly.
Otherwise it can provide useful low security access control.
PINs
are more secure because users are less likely to divulge their own
number. PINs can be used within a system to record an individual’s
movements. For more than a small number of users 5 to 6 digit PINs
should be considered to maintain the very low probability of guessing
or keying another user’s PIN.
Convenience
for the user is excellent because possession of something is not
required.
Mag Swipe Access
Control
These
systems usually consist of a Power Supply, Mag Swipe Reader, an Access
Control Unit (ACU) and a Door Release Mechanism. The Power Supply will
be connected into a local mains supply and will provide power to the
ACU, which will be located inside of the building. This in turn
provides power to the Mag Swipe Reader, which will be positioned
adjacent to the entrance door being secured. Also connected to the ACU
will be the Door Release Mechanism, which should be rated so as to
compliment the security of the system.
Access
is granted when a valid card is passed through the Mag Swipe Reader.
Magstripe cards are mostly unique to the holder. They are more
difficult to duplicate than keys but an expert can copy the
information programmed into a card.
The
cost per user is minimal.
Security
with this type of system is generally good because each card is
different and if lost or copied the card in question can easily be
voided from the system.
Convenience
is good as the cards are slim and can easily be stored with credit
cards.
Administration
of cards within a system is easy.
Mag
Swipe readers require an open slot for the card to pass through and
therefore the readers are often vulnerable to vandalism.
The continual motion of cards passing through the reader can
also shorten the life expectancy of the reader head itself.
Proximity Access
Control
These
systems usually consist of a Power Supply, Proximity Reader, an Access
Control Unit (ACU) and a Door Release Mechanism. The Power Supply will
be connected into a local mains supply and will provide power to the
ACU, which will be located inside of the building. This in turn
provides power to the Proximity Reader, which will be positioned
adjacent to the entrance door being secured. Also connected to the ACU
will be the Door Release Mechanism, which should be rated so as to
compliment the security of the system.
Access
is granted when a valid token is presented to the Proximity Reader.
Proximity Tokens are unique to the holder. They are extremely
difficult to duplicate.
The cost per user is moderate.
Security
with this type of system is good because each token is different and
if lost the token in question can easily be voided from the system.
Convenience
is excellent as tokens can be presented to the reader whilst still in
wallets, bags, badge holders, etc.
Reliability
of tokens is excellent, especially the passive types, which do not
contain batteries. Tokens with a lifetime warranty are available.
Administering
tokens is easy.
Proximity
readers do not require openings to read tokens and are therefore less
susceptible to vandalism. Vandal
proof solutions can be integrated into most readers and some readers
even have the technology to be incorporated within the structure of
the building being secured.

|